Take a
Free Practice Test
Fill out our short 10 question quiz to discover how you would place on your crane operator certification written exams. Don’t be discouraged if the scores weren’t as you expected. California Crane School has prepared thousands of candidates on their crane operator certification journey with some of the highest pass rates.
After attending our course, come back to see how your results have improved!
From Application to Certification,
we’re with you every step of the way.
Complete the free quiz below to the best of your knowledge. If you don’t know an answer, leave it blank. Upon completion you will receive your scores.
1. Wood or other material that is used to support a crane and distribute loads to the ground is refered to as.
-
A.outrigger beams
-
B.float pads
-
C.blocking
-
D.outrigger pads
2. A boom angle indicator is used to measure booms angle relative to ____.
-
A.vertical
-
B.horizontal
-
C.jib
-
D.ground
3. At which point of a load is an object's weight evenly distributed?
-
A.center of gravity
-
B.balance point
-
C.fulcrum
-
D.center
4. OSHA refers to someone who is capable of identifying existing and predictable hazards in the surroundings or working conditions as a ____.
-
A.qualified person
-
B.competent person
-
C.designated person
-
D.qualified signalperson
5. By OSHA standards, the individual who is capable of identifying existing and predictable hazards in the surroundings or working conditions?
-
A.qualified signalperson
-
B.designated person
-
C.competent person
-
D.qualified person
6. To help provide stability for lifting heavy loads, which of the following is used to supplement the weight of the crane?
-
A.load moment indicator
-
B.auxiliary boom head
-
C.counterweight
-
D.gantry
7. Someone who is recognized by degree, certificate or by professional standing due to extensive training or knowledge is considered by OSHA to be ____.
-
A.dedicated
-
B.designated
-
C.competent
-
D.qualified
8. The revolving frame of equipment on which the operating machinery (and many cases the engine) are mounted along with the operator’s cab are known as:
-
A.lowerworks/understructure
-
B.centerpin
-
C.frame
-
D.upperworks/superstructure
9. If assembly and disassembly of a crane is NOT being directed by a person who meets the criteria of a competent person AND a qualified person, it can be directed by a competent person assisted by which of the following?
-
A.a rigger
-
B.a signalperson
-
C.a qualified person
-
D.a dedicated spotter
10. Unless the manufacturer's procedures permit otherwise, while making a lift all outriggers or stabilizers must be ____.
-
A.fully retracted
-
B.made of steel
-
C.fully extended
-
D.supported by cribbing
Please, provide your email to receive the test results.
Check your email for test results.
Your test is empty.